Categories

Knowledge

Coupling deviation and special attention point
Dec 10, 2018

The learning of the coupling, the following will mainly involve its two aspects, so the specific will be carried out through the problem, so that everyone can learn clearly, so that it can be well grasped, no doubt. At the same time, through the following study, you can also add some knowledge in this area, so why not do it!


The main types and explanations of the deviation of the coupling are:

Parallel deviation: refers to the amount of radial deviation between the two axes of the phase connection.

Angle deviation: refers to the angle of deviation between the two axes.

Axial deviation: refers to the amount of axial deviation between the two axes of the phase connection.

Question: What are the precautions when using the coupling in a special working environment?

In the special working environment, the precautions when using the coupling are mainly:

(1) If the environment is corrosive, then G1TS, T2TS, G2CS, G3TS, G3CS, G5CS and other stainless steel materials should be used.

(2) The rated torque on the data must be greater than the load torque of the system.

(3) Its dimensional specifications, etc., which are also subject to relevant design conditions and requirements.


  • QR CODE
  • facebook