While choosing the right cardan shaft, one needs to consider the types of prime movers, power, speed, the load type of the transmission (single constant load, pulsating load, or a two-way alternating load).
Secondly, it is necessary to know in advance how the universal joint shaft is installed, whether it is horizontal, vertical or inclined; horizontal and vertical angles should also be considered. In addition, consideration should be given to: the environmental conditions, the connection pattern at both ends, as well as the specific installation dimensions.
When the rotational speed of the universal joint shaft is high, dynamic balance should is necessary. There are no restrictions on the installation location. If it does not need to be stretched, then position compensation should be considered in the system.www.morayshaft.com